Uses: PVC coated wire bundle can be used in daily life, industrial lashing, protective chain link fence used, can also be used in racks or handicraft production. PVC coated welded wire mesh: plastic material is a thermoplastic powder coating softens when heated with welded mesh prices, after cooling but also cured film properties, mainly physical plasticizing melt forming process. Dip process substantially thermoplastic plastic powder, typically polyethylene, polyvinyl chloride, poly vinyl chloride, suitable non-toxic coating made for general decorative, corrosion resistant coating. All in all, spray products are used indoors, dip products are used outdoors, spray dip higher than the cost. Dip welded wire mesh: Dip the finished surface treatment of nets. The surface of the molded PVC corrosion welded wire mesh or woven mesh, for processing. Is a steel matrix, polymer resin is weather-resistant outer layer (thickness 0.5-1.0mm), with corrosion and rust, acid, moisture, insulation, anti-aging, feel good, environmental protection, long life and other characteristics, is a traditional paint, galvanized coating replacement products, widely used. Dip welded wire mesh is mainly used for: highway fence, rail fence, airport fence, garden fence, residential fence, house fence, residential fence, metal crafts stand, bar cage, sports and fitness equipment. Welded wire mesh welded mesh point should be in good contact sheet to protect the inter-weldment can be stabilized by certain current. Avoid sweating occurs. Weld portion is not formed or formed in the stack attached to the solder alloy solder. Weld reason: dirty appearance welded parts, welded (Recommended Products: Ningbo welding) shaken when gripping tool, the tip temperature is too low, the flux does not meet the requirements, the solder joints too much or too little. Joints have enough welders (Recommended products: Ningbo welder) mechanical strength. Welded wire mesh points to Peugeot, the state of welded joints to render smooth mesh applications, there should be no sharp edges or pull phenomenon welded mesh technology, the establishment of reason and pull the tip soldering temperatures; iron removed in the direction, speed and flux related. Welded wire mesh connected to have the condition 1. Weldment must have been weldability 2 weldment appearance should be kept clean 3. Applying appropriate flux 4. Appropriate welding temperature. 5 After soldering temperature is determined, should be determined according to the length of the wet state welding time. Time is too short, insufficient solder a moist, too long, there is the risk of damage to the circuit board, thus restraint between 1.5-4s. Welded wire mesh welded wire mesh technology _ _ Lei Wang welded mesh network provided by the Lei Wang Netherlands. If you have any questions about this information or consultation, please contact us now! Our Company Name: Ray Wang Anping Wire Mesh Products Co., Ltd. (www.apleiwang.com/) Contact: Zhu Lei, or click on "Business League call" direct dialogue with us!