Galvanized welded steel mesh will appear rust corrosion it? The answer is of course, rust, zinc coating thickness determines the length of life of anti-corrosion, general galvanized zinc content of 0.03, according to customer requirements can be on a little higher, the amount of zinc thicker welded steel mesh anti-rust over time the longer welded mesh prices, general corrosion of galvanized welded steel mesh can reach 3-7 years. Wall insulation with galvanized welded wire mesh steel mesh wire diameter generally use:? 0.9,0.8,0.7,0.6 galvanized welded steel mesh in the construction of national standards for the building insulation 0.9mm, but the actual construction will use 0.6,0.7 of Compare these relatively thin wire, soft, easy construction, 0.9mm relatively stiffer. Welded wire mesh points should be in good contact, being able to guarantee the stability of a constant current through the inter weldment. Avoid sweating occurs. Weld portion is not formed or formed in the stack attached to the solder alloy solder. Weld reason: the appearance of being dirty welded parts, welded (Recommended Products: Ningbo welding) shaken when gripping tool, the tip temperature is too low, the flux does not meet the requirements of the welding wire mesh technology, many solder joints or too little. Joints have enough welders (Recommended products: Ningbo welder) mechanical strength. Welded wire mesh welded wire mesh point to Peugeot, the solder joint to render smooth state, there should be no sharp edges or pull phenomenon welded mesh merit, to establish grounds and pull the tip soldering temperatures; iron removed in the direction, speed and flux related . Welded wire mesh connected to have the condition 1. Weldment must have been weldability 2 weldment appearance should be kept clean 3. Applying appropriate flux 4. Appropriate welding temperature. 5 After soldering temperature is determined, should be determined according to the length of the wet state welding time. Time is too short, insufficient solder a moist, too long, there is the risk of damage to the circuit board, thus restraint between 1.5-4s. Lei Wang welded wire mesh welded wire mesh prices _ [] _ ??welded mesh network provided by Ray Wang Netherlands. Find "Dutch network, wave network, dip nets Netherlands, construction mesh" fly suppliers, network operators choose to have the whole alliance certification: Ray Wang Anping Wire Mesh Products Co., Ltd. (www.apleiwang.com/), trustworthiness and reliability, now click on the "Business League Support" on page live chat with us now!