Dutch network during welding problems may occur 1, weldments temperature changes, cracks cracks occur because the temperature is welded directly to a high temperature is heightened, in order to reduce the occurrence of this situation, on the one hand We can weld preheating, on the other hand you can use a good crack resistance and other low-hydrogen electrodes. 2, is not defended by the Dutch network of welded joints welded interfaces through which is due to unclean PVC Dutch network, operating methods of welding is incorrect. Before welding the weld we have to first clean, dry dip Dutch network, to use the proper welding methods. 3, did not appear at the interface fusion welding or welding interface does not appear porosity may be due to the use of fusion welding or soldering surface is not suitable for the Dutch network is not clean, there are holes in the bubble bath because the weld solidification during welding unable to escape leaving a hole formed. Dutch network to avoid these situations in the welding process, we first have to be ready right rod, be sure to clean up in advance at the Netherlands weld mesh advantages, the use of proper welding methods. Holland used several data about network specifications: Dutch network should be used cold drawn welded smooth wire manufacturing. Roll Netherlands network should adopt the same type of steel welded. Welded by shape, size is divided into two kinds of stereotypes with custom. Dutch network setting and the mesh size of the wire diameter in both the transverse and longitudinal direction can be different, but the wire in a unified direction, there should be a similar diameter, spacing and length of the mesh, the relevant scale have been made, the procedure regulations. Dutch custom network mesh wire diameter and spacing width format requests should be based on design and construction, the joint detailed engineering situations, negotiated by both parties conclude. Dutch Weave Wire diameter 0.8-3.5mm, which can be taken to upgrade 0.5mm diameter. Dutch network length should not exceed 30m, the width should not exceed 2.0m. Wire (or vertical wire) Dutch net production direction spacing appropriate for the 50,100,150,200 mm, wire spacing in the other direction of the individual as 50,100,150,200,300 mm, sometimes up to 400mm. Common are: 50 × 50mm, 50 × 100mm. Width of 1.2 m, 1.5 m, 1.8 m, 2.0 m. Netherlands Network | Lei Wang Netherlands Network | PVC Netherlands Netherlands mesh network provided by Ray Wang. Lei Wang Anping Wire Mesh Products Co., Ltd. (www.apleiwang.com/) network in the Netherlands, wave nets, dip nets Netherlands, construction mesh industry has high visibility, integrity management, both quality of service, welcome to inquire , or consult our "Business League call" it!