Steel mesh | Lei Wang Netherlands Network | Usage steel mesh network provided by Ray Wang Netherlands. Steel mesh | Lei Wang Netherlands Network | steel mesh specifications Ray Wang Anping Wire Mesh Products Co., Ltd. (www.apleiwang.com/) 2013 upgrade been newly introduced steel mesh is reinforced by the longitudinal and transverse cross by lashing or made of welded mesh. Is one of the Ministry of Construction "2005 Construction focus on promoting the application of new technology 10" content. Theoretical weight steel mesh formula: steel mesh theoretical weight (KG) = length of reinforced steel mesh used (M) * wire diameter (MM) * wire diameter (MM) * 0.00617 (φ10 reinforced 0.616539kg / m) steel mesh applications In the industrial and civil building floor beams, roof, walls, concrete pavement, pavement, airport runway, tunnel lining, culvert, dock floor, precast and other fields. Bridge, also known as welded: welded steel mesh, welded steel, welded steel mesh, welded steel mesh, steel mesh and so is the longitudinal reinforcement and transverse reinforcement were certain pitch and arranged at right angles to each other, all cross points are. mesh welded together. Bridge steel mesh installation and performance: 1, reinforced steel mesh installation process and the relationship between the various templates, steel beams pass the inspection → laying base mesh (double two-way network before the end of the laying of the short cross) → end network inspection and approval → → laying lashing positioning → → laying pipeline stent surface mesh (first laid across the surface mesh short) → surface network inspection and approval → (according to design requirements placed bearing stiffeners) → Mesh → lashing positioning columns, walls positioned steel banding → embedded water pipes. 2, the construction in strict accordance with reinforced steel mesh steel mesh layout diagram advantages, unspecified site are not free cutting cold rolled ribbed steel welded mesh. 3, the bottom net force tendon anchor and lap: stretching bearing anchorage length of not less than 10d (d is the diameter of longitudinal reinforcement), and not less than 100mm. When using double bidirectional bottom mesh steel mesh products, laying the first number with "b" mesh steel mesh, cold rolled ribbed do not overlap each (erect ribs direction) between uses steel mesh welded steel mesh, with the welded steel mesh spacing not greater than the distance between the reinforced; When using single-end network, starting with the middle to both sides of the paved number "b" mesh, finally laying "l" with a mesh number, each welded mesh between the need to lap, lap using the stack take law, lap length is not less than the specification lap length.