Construction mesh antiseptic principle: antiseptic dip tanks it works. Tank 2 is elongated container interior preservative; tank is provided with a stirrer 3, blender can move around in the tank, the preservative Stir to ensure impregnation quality stability. The move by the agitator motor 5 6 driven by a chain. As preservatives suspensions, must rely on the mixer tank preservatives to maintain a uniform, otherwise it will affect the effect of anti-corrosion coating. 2, construction mesh dryer with steam as the heating medium, steam through the radiator right inside mesh for heating. More than a dozen groups that can be loaded carton steel mesh, construction mesh loaded from the entrance, on the drive chain, each group into a steel mesh to move the chain once, after a certain time moving drying, drying is completed The mesh hanging out by the exit. 3, automatic drying production line corrosion is a two-tier steel frame. Steel mesh with the drill rod, steel beams, composed of a group assembled frame (a desired mold steel mesh as a group). To the lower deck with a crane hanging mesh assembled car, the car moves in the lower track, trackside mobile is driven by a hydraulic cylinder. When the move to be lifting bench at the time, stand down, to make steel immersion dipping tank, and then stand up and vibrating a moment, so that the excess preservative trickle slot; dolly to move forward into the air box for drying. After drying mesh and then dipping into the second slot for a second impregnation drying, and then rose to the upper lifting frame rail return, re-entering the drying chamber for secondary drying, anti-corrosion finish work. Drying mesh lifted by a crane group will mesh into a mold. This mesh processing line anti-corrosion coating, every 6 minutes to complete a piece of anti-corrosion processing network, high yield.