Netherlands mesh production rules of order, the Netherlands belong welded mesh should be used cold rolled smooth steel production. Roll Dutch network should adopt the same type of steel wire welded into. Netherlands mesh welded mesh according to the shape, size is divided into two kinds of stereotyping and customized. One is the Dutch network setting both horizontal and vertical directions in the wire diameter and the mesh size can be different, but in the same direction of the wire should have the same diameter, pitch and length of mesh, has been in the standards, procedures made in the regulations. Another is the custom of the Dutch net mesh wire diameter and spacing format width should be based on the design and construction requirements of the specific project is a combination of circumstances determined by the supply and demand sides negotiated. Netherlands mesh wire diameter of 0.8-3.5mm, which can be used to upgrade 0.5mm diameter. Dutch network length should not exceed 30m, the width should not exceed 2.0m. Dutch wire mesh production direction (or called vertical wire) spacing appropriate for the 50,100,150,200 mm, the other direction of the wire spacing is generally 50,100,150,200,300 mm, sometimes up to 400mm. Common are: 50 × 50mm, 50 × 100mm. Width of 1.2 m, 1.5 m, 1.8 m, 2.0 m.